10
STARTING THE ENGINE
1. Turn the engine switch to the
“ON” position.
2. Pull the choke rod .
3. Ensure that the Fuel cock is in Stop
(CLOSED) position. Then turn the
drain cock to ‘ON’ and drain the
kerosene from the carburetor into
a container.
4. Turn the drain cock to ‘OFF’ . Return any
removed kerosene from the carburetor
into the Kerosene tank.
OPERATION
COLD STARTING
(For WBK 30 & WPK 20)
5. Turn the fuel cock to the ‘START’.
6. Raise the throttle lever slightly.
NOTE : Ensure priming water before starting.
7. Pull the starter grip lightly until resistance
is felt, then pull briskly.
Do not allow the starter grip to
snap back against the pumpset.
Return it gently to prevent damage
to the starter.
NOTICE
8. Turn the fuel cock to ‘RUN’ position.
9. Push choke rod as engine warms.
