7
1. OIL LEVEL
Always check the following items before you start the pumpset.
Check the General Condition of the Pumpset.
1. Look around and underneath the pumpset for signs of oil or petrol leaks.
2. Remove any excessive dirt or debris, especially around the muffler and recoil starter.
3. Look for sign of damage.
4. Check that all shields and covers are in place, and all nuts, bolts, and screws are
tightened.
CAUTION:
Be sure to check the pumpset
on a level surface with the
pumpset stopped.
4-STROKE MOTOR OIL
SAE 10W- 30
API SF or above
1. Check the oil level, if the oil level is low.
PRE-OPERATION CHECK
2. Fill the oil to the upper level.
OIL ALERT SYSTEM
1. If the oil in the crankcase falls below a safe limit then the
oil alert system will automatically turn the pumpset OFF.
2. In that case fill the oil to upper level and restart the pumpset.
Check engine oil before each operation. Use only recommended engine oil.
CAUTION
ON
OFF
ON
OFF
