8.
Remove the rear axle shaft, drive chain
adjusters, side collars and rear wheel from
the swingarm.
Installation
1.
To install the rear wheel, reverse the
removal procedure.
2.
Temporarily tighten the rear axle nut.
3.
Tighten the brake stopper arm nut.
Torque:
22 N·m (2.2 kgf·m, 16 lbf·ft)
4.
5.
Adjust the rear brake pedal freeplay.
6.
Tighten the rear axle nut.
Torque:
59 N·m (6.0 kgf·m, 44 lbf·ft)
7.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
A used cotter pin may not effectively secure a
fastener. Always replace a used cotter pin
with a new one.
Tyre Puncture
u
Removing Wheels
Troubleshooting
77
Drive chain
Rear axle
shaft
Drive chain
lock nut
Drive chain
adjusting nut
Drive chain
adjuster
