Installation
1.
Install the side collar into the right side
wheel hub.
2.
Position the wheel between the fork legs
and insert the front axle shaft from the
right side, through the right fork leg and
wheel hub.
3.
Make sure that the lug on the left fork leg
is located in the slot of the brake panel.
4.
Tighten the front axle nut.
Torque:
59 N·m (6.0 kgf·m, 44 lbf·ft)
5.
Install the speedometer cable securely.
6.
Install the front brake cable and front
brake adjusting nut.
7.
Adjust the front brake lever freeplay.
After installing the wheel, apply the brake
lever several times and then check if the
wheel rotates freely. Recheck the wheel if the
brake drags or if the wheel does not rotate
freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tyre Puncture
u
Removing Wheels
Troubleshooting
75
Continued
Lug
Slot
