TROUBLESHOOT PROCEDURE SSD-NAVI (version 3.00)
- Page 6 of 8 -
4-8 : Aux
Please check these points:
a)
Check with another device.
b)
Confirm that device plays normally when disconnect to unit.
c)
Change the audio input level
d) Check and replace the device cable.
e) Reset the unit to factory setting
f) If problem remains, replace unit.
4-9 : Sound quality problem :
Please check these points:
a)
Check the volume > 0
b)
Check speakers lines (resistor should be around 4 Ohms).
Front Left speaker: measure resistor between
C4- pin 14 and 15
Front right speaker: measure resistor between C4- pin 18 and 19
Rear Left speaker: measure resistor between C4- pin 2 and 3
Rear Right speaker: measure resistor between
C4- pin 6 and 7
c) Adjust Equalizer settings.
d) Remove device (usb,…) and reset the unit to factory setting. Try again.
e) If problem remains, replace unit.
5-1 GYRO sensor
a) Check the GYRO sensor status in Navigation system Check menu.
d)
GYRO sensor can be activate on map display by moving the unit left/right.
e)
Remove CD/USB device and reset the unit to factory setting.
f)
If problem remains, replace unit.
5-2_ VSP connection (speed pulse)
a) Check the VSP signal in Navigation system Check menu.
a)
VSP signal can be activate by driving forward/backward in a few meter
Measure the VSP signal on C4-Pin 22 (fluctuating voltage depends of the vehicle
speed)
b)
Remove CD/USB device and reset the unit to factory setting.
c)
If problem remains, replace unit.
5– GPS and navigation problem:
