Collision Mitigation Braking System
™
(CMBS
™
)
*1
Can assist you when there is a possibility of
your vehicle colliding with a vehicle or a
pedestrian detected in front of yours.
The system can give you visual, audible,
and tactile alerts when a potential collision
is determined, and reduce your vehicle
speed to help minimize collision severity
when a collision is deemed unavoidable.
The system activates when:
• The speed difference between your vehicle and a vehicle or pedestrian
detected in front of you is about 3 mph (5 km/h) and over with a chance of a
collision.
• Your vehicle speed is about 62 mph (100 km/h) or less and there is a chance
of a collision with an oncoming detected vehicle or a pedestrian in front of
you.
n
Alert Stages
The system has three alert stages for a possible collision. Depending on the
circumstances or CMBS settings, CMBS may not go through all of the
stages before initiating the last stage.
Stage 1: Visual and audible warning , steering wheel vibrations
Stage 2: Visual and audible warning, light brake application
Stage 3: Visual and audible warning, strong brake application
n
Changing Settings
Determine the warning timing.
1. From the HOME screen, select
Settings.
2. Select Vehicle. The vehicle must be
in Park (P).
3. Select Forward Collision Warning
Distance.
4. Select Long, Normal, or Short.
5. Press BACK to exit the menu.
*1 - If equipped
DRIVING
116 |
n
Turning CMBS On or Off
Press and hold the CMBS OFF button. A
beep sounds and a message appears in
the MID. The CMBS indicator appears
when the system is off.
n
Important Safety Reminder
CMBS is designed to reduce the severity of an unavoidable collision. It does
not prevent collisions nor stop the vehicle automatically. It is still your
responsibility to operate the brake pedal and steering wheel appropriately
according to the driving conditions.
Blind Spot Information
*1
Alerts you to a detected vehicle in your left or right blind spot while driving 20
mph (32 km/h) or higher.
When a vehicle is detected in your blind
spot, the blind spot indicator turns on and
stays lit until the area is clear.
When your turn signal is on and a vehicle is
detected, the blind spot indicator blinks and
a beep sounds until the area is clear or the
turn signal is off.
n
Changing Settings
Determine the warning type, or turn the system off.
1. From the Home screen, select
Settings.
2. Select Vehicle. The vehicle must be
in Park (P).
3. Select Driver Assist System Setup.
4. Select an alert type, or turn the
system off.
5. Press BACK to exit the menu.
*1 - If equipped
DRIVING
| 117
