Honda HRM300/500, Руководство пользователя

Страница: 51 / 70

49
6
TROUBLESHOOTING / 7 MAINTENANCE
Periodic inspection and maintenance / Cleaning and checking
7
MAINTENANCE
Periodic inspection and maintenance
The lawnmower must be periodically inspected and maintained for safety and to keep it running at a high
level of performance.
Periodic maintenance will also help to extend service life.
The required service intervals and the kind of maintenance to be performed are described in the following
chart.
Honda recommends annual service to be completed by your local authorised Honda dealer. The dealer will
be able to perform a variety of checks and software updates that cannot be completed by the owner.
Maintenance schedule
REGULAR SERVICE PERIOD
Every week
Every year or
500 hours
(whichever
comes soonest)
Page
Perform at every indicated
period or operating hour
interval, whichever comes
soonest.
Blades *
1
Check
™
(
M
page 53)
Blade disc *
1
Check
™
(
M
page 53)
Manual stop button Check
™
(
M
page 52)
Body parts *
1
Clean
™
(
M
page 50)
Check
™
*
2
–
Docking station
Clean
™
(
M
page 51)
Check
™
(
M
page 54)
Docking station screws Check-adjust
™
*
3
(
M
page 54)
Rear (drive) wheels *
1
Clean
™
(
M
page 50)
Check
™
*
2
–
Front (caster) wheels *
1
Clean
™
(
M
page 50)
Check
™
*
2
–
*1 Blades, the blade disc, body parts, the front (caster) wheels, and the rear (drive) wheels should be replaced as
needed.
*2 These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically
proficient. Refer to the Honda shop manual for service procedures.
*3 If the screws become loose, tighten them securely. For details, see “Installation” (
M
page 12).
Cleaning and checking
Dirt and grass may accumulate on the top and bottom of the lawnmower during and after mowing, and the
blades may become worn, damaged, or unable to turn. Make sure to check the lawnmower according to
the chart in “Periodic inspection and maintenance” (
M
page 49).
N
WARNING
- Make sure to press the manual STOP button and turn the lawnmower off before performing the
following procedures.
- Put on a pair of work gloves before performing the following procedures.
NOTE:
- Remove the lawnmower from the docking station when performing the following procedures.