Setting up the lawnmower
18
1-
3
Select [Clockwise(CW)] or [Anticlockwise(ACW)]
referring to the layout of your docking station and
boundary wire, and press the
H
button.
Garden layout
1/7
Docking direction
Clockwise(CW)
Anticlockwise(ACW)
NEXT
1-
4
Select [NEXT] and press the
H
button.
1-
5
Enter the values of the boundary wire length and
garden size.
NOTE:
- For details on the boundary wire length or
garden size, contact your dealer.
- Input the boundary wire length exactly because
the values which are automatically configured
are associated with the boundary wire length.
Garden layout
2/7
Boundary wire length
_
_ _
_
m (MAX800m)
Garden size
_ _ _ _ m
2
(MAX3000m
2
)
NEXT
1-
6
Select [NEXT] and press the
H
button.
1-
7
Confirm the boundary wire connection of the
docking station terminals with the displayed image.
Select [OK] and press the
H
button.
NOTE:
- For detail, see “Conditions for installing the
docking station” (
M
page 12).
Garden layout
2/7
Station connector
OK
1-
8
Select [Yes] or [No] to the question on the narrow
passages, and enter the values of the minimum
passage width from 100 to 300.
Garden layout
3/7
Are there
narrow passages?
Yes No
What is the minimum
passage width(wire to wire)
_ _ 0cm
(100-300cm)
NEXT
1-
9
Select [NEXT] and press the
H
button.
The configuration of garden layout is completed.
The setup wizard top screen is displayed and [1.Garden
layout] is checked.
NOTE:
- If you want to change the settings in this setting,
select this menu again. You can modify the
settings through the setup wizard.
- Confirm the following settings
Homing setup - Passage width
Start point setup - Passage width
- Input the narrow passage of Garden correctly.
Be sure to test the settings because the
lawnmower automatically set the passage width
of departure and the return.
