Component identification
10
3
PREPARATION
Component identification
Body
Docking station
Supplied items
Ruler
Part of the packaging of
this product is a ruler.
This ruler is used to
check the position
of the boundary wire
installation.
Transformer
Install the transformer off the ground.
After making all other connections,
connect the transformer to the power
outlet (House).
Power cord
Connect the power cord to
the transformer and docking
station.
Boundary wire
Lay boundary wire around the
area in which you want the
lawnmower to operate.
Length for HRM310: 200 m
Length for HRM520: 300 m
Pegs
Use pegs to hold the
boundary wire in place
when laying it.
Quantity for HRM310: 200
Quantity for HRM520: 300
Connectors for the
boundary wire
Use connectors to bind the
boundary wire and connect
it to the docking station.
Quantity: 2
Spare Blades
Use spare blades to
replace the worn ones.
Quantity: 9
Charging plug
Screw
Quantity: 7
The lawnmower recharges at the docking
station, and returns to the docking station
when mowing is finished or the battery’s
charge becomes low. (You can configure
the battery level for returning to the docking
station from 10% to 50%.)
Top view
Control panel
Height adjustment dial
Manual STOP button
When you press the
manual STOP button,
the control panel cover
pops up.
Bottom view
Charging socket
Front (caster)
wheels (
Ï
2)
Blade disc
Blades (
Ï
3)
Carrying area
Rear (drive) wheels (
Ï
2)
