Swift Chassis DB-1 & DB-6
L15A7 Engine Installation Manual
7
8/2010
Install Slave
Cylinder cont’d
For the DB-6
Remove the release bearing from the
Swift assembly.
Press on the HPD supplied adapter.
Install the new release bearing.
Clutch Slave Cylinder Placement
1. Measure distance from the back of the engine block to the end of the clutch fingers. This is dimension
“A”
2. Place a straight edge across the front of the bell housing and measure from the straight edge to to the
mounting surface of the slave cylinder. This is dimension “B”.
3. With the slave cylinder compressed into the bore, measure the installed height of the slave cylinder.
Add 4.0mm to this dimension for freeplay. This will be dimension “C”.
4. Use the following equation to determine the proper slave cylinder spacer length. B
– C – A = XX
Spacer Length.
