uu
If a Tire Goes Flat
u
Temporarily Repairing a Flat Tire
232
Han
d
lin
g the U
n
expected
6.
Plug in the compressor to the accessory
power socket.
u
Be careful not to pinch the cord in a
door or window.
2
P. 130
7.
Turn the power switch to ACCESSORY
(
q
.
u
In freezing temperatures, turn the
power switch to ON
(
w
.
8.
Turn the air compressor on to inflate the
tire.
u
The compressor starts injecting sealant
and air into the tire.
9.
After the air pressure reaches 32 psi (220
kPa), turn off the kit.
u
Check the air pressure gauge on the air
compressor.
10.
Unplug the kit from the accessory power
socket.
11.
Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
12.
Push the deflate button until the gauge
returns 0 psi.
1
NOTICE
Do not operate the tire repair kit compressor for
more than 15 minutes. The compressor can overheat
and become permanently damaged.
Until the sealant injection is complete, the pressure
shown on the pressure gauge will appear higher than
actual. After the sealant injection is complete the
pressure will drop and then begin to rise again as the
tire is inflated with air. This is normal. To accurately
measure the air pressure using the gauge, turn the air
compressor off only after the sealant injection is
complete.
If the required air pressure is not reached within 15
minutes, the tire may be too severely damaged for
the kit to provide the necessary seal and your vehicle
will need to be towed.
See an authorized Honda Fit EV dealer for a
replacement sealant bottle and proper disposal of an
empty bottle.
Accessory Power Socket
Air Compressor Switch
OFF
ON
Air Pressure Gauge
Deflate Button
14 FIT EV-31TX96100.book 232 ページ 2013年6月6日 木曜日 午後2時33分
Содержание Fit EV
Страница 97: ...96 14 FIT EV 31TX96100 book 96 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 141: ...140 14 FIT EV 31TX96100 book 140 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 187: ...186 14 FIT EV 31TX96100 book 186 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 269: ...14 FIT EV 31TX96100 book 268 ページ 2013年6月6日 木曜日 午後2時33分 ...