uu
Charging
u
Charge the High Voltage battery using a Level 1 or 2 charger
176
Driving
5.
Open the charge lid and the inlet cover.
6.
To connect the cable to the vehicle, push
the cable’s charge connector until it clicks
to the charge lid.
u
The charge indicator on the charge lid
stays on.
■
When charging is completed
Press the release button on the charge
connector to release it from the inlet.
u
Make sure to the close the inlet cover
before you close the lid.
The charge indicator goes off once charging is
completed.
1
The charge speed slows down towards the
completion of the battery charging.
The charge lid can open by remote transmitter.
Under the following circumstances, the High Voltage
battery may not be charged even if the charge
connector is properly connected to the vehicle’s inlet:
•
When the charging timer is set but the timer has
not yet started.
•
When the High Voltage battery’s charge mode has
been remotely turned off.
Be sure to follow the instructions and safety
precautions provided with the Level 2 charging
equipment.
Press
Inlet Cover
Charge Lid
Charge Connector
Charge Indicator
Release button
14 FIT EV-31TX96100.book 176 ページ 2013年6月6日 木曜日 午後2時33分
Содержание Fit EV
Страница 97: ...96 14 FIT EV 31TX96100 book 96 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 141: ...140 14 FIT EV 31TX96100 book 140 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 187: ...186 14 FIT EV 31TX96100 book 186 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 269: ...14 FIT EV 31TX96100 book 268 ページ 2013年6月6日 木曜日 午後2時33分 ...