uu
Maintenance Under the Hood
u
Cooling System
198
Main
tenan
ce
1. Make sure the motor and radiator are
cool.
2.
Turn the radiator cap counterclockwise and
relieve any pressure in the coolant system.
Do not push the cap down when turning.
3.
Push down and turn the radiator cap
counterclockwise to remove it.
4.
The coolant level should be up to the base
of the filler neck. Add coolant if it is low.
5.
Put the radiator cap back on, and tighten it
fully.
6.
Pour coolant into the reserve tank until it
reaches the
MAX
mark. Put the cap back
on the reserve tank.
■
Radiator
1
NOTICE
Pour the fluid slowly and carefully so you do not spill
any. Clean up any spills immediately; they can
damage components in the motor compartment.
3
WARNING
Removing the radiator cap while the motor
is hot can cause the coolant to spray out,
seriously scalding you.
Always let the motor and radiator cool
down before removing the radiator cap.
Radiator Cap
14 FIT EV-31TX96100.book 198 ページ 2013年6月6日 木曜日 午後2時33分
Содержание Fit EV
Страница 97: ...96 14 FIT EV 31TX96100 book 96 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 141: ...140 14 FIT EV 31TX96100 book 140 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 187: ...186 14 FIT EV 31TX96100 book 186 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 269: ...14 FIT EV 31TX96100 book 268 ページ 2013年6月6日 木曜日 午後2時33分 ...