Honda FF500, Руководство пользователя

Страница: 33 / 282

30
Gear Selection Table (When engine speed is 3,000 min
-1
)
* Tiller speed applies when standard tires are used.
Handling tips
• Adjust the handlebar height to a comfortable position (waist height for normal
tilling).
• If the machine will not move forward, release the main clutch lever and press
down on the handlebar to raise the rotary little and pull the tiller backward
slightly, then raise the handlebar and pull the main clutch lever to work.
• Stop the tines before crossing gravel drives, walks, or roads. Stay alert for hidden
hazards or traffic.
• Stop the engine immediately if the tiller vibrates abnormally. Check the tiller for
damage or loose parts, and repair or replace them before using the tiller again.
• Turning:
Release the main clutch lever and lower the engine speed.
Move the differential lock lever to the UNLOCK position.
Set the gearshift lever to the 1 position.
Press the handlebar to raise the rotary little, and pull the main clutch lever and
turn the tiller.
After turning, release the main clutch lever and move the gearshift lever to the
Tine/wheel engaged position to work.
Gear position *Tiller speed Rotary speed Suitable work
1 0.18 m/s
(0.59 ft/s)
— Moving tiller, loading tiller onto a truck, taking
tiller on or off field
2 0.31 m/s
(1.02 ft/s)
— Moving tiller, loading tiller onto a truck, taking
tiller on or off field
3 1.00 m/s
(3.28 ft/s)
— Moving tiller
R 0.33 m/s
(0.83 ft/s)
— Moving tiller, unloading tiller from track,
taking tiller on or off field
Tine/wheel
engage 1
0.18 m/s
(0.59 ft/s)
141 min
-1 Tilling, ground breaking, weeding
Tine/wheel
engage 2
0.31 m/s
(1.02 ft/s)
141 min
-1 Tilling, ground breaking, weeding
36V246400_EN.book 30 ページ ２０２２年１月２７日 木曜日 午後５時３９分