−
26
Handlebar position adjustment
Handlebar height:
100 cm (3 ft 4 in)
89 cm (3 ft)
NUT
BOLT HOLE
UPPER BOLT AND NUT
LOWER BOLT
(ADJUSTING BOLT)
Set the front wheel in the tilling position (
position, see page
23). Place the tiller on a firm level ground with the rear wheels and
tines, and secure it not to move.
Loosen the handlebar tightening upper bolt and nut.
Do not remove the handlebar tightening bolt.
Remove the nut and remove the lower bolt (adjusting bolt).
Move the handlebar to the position you want. Install the lower bolt
and nut by aligning the bolt holes and tighten the nuts securely.
Handlebar height can be set in either the HIGH or LOW position in
accordance with the work or the height of the operator.
1.
2.
3.
4.
08/08/06 08:12:15 32V19600_028
