Honda EM10000, Руководство пользователя

Страница: 45 / 86

43
SERVICING YOUR GENERATOR
ENGINE OIL CHANGE
Engine oil capacity:
OIL FILLER CAP FUNNEL
SEALING WASHER
OIL DRAIN BOLT
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station or recycling center for reclamation. Do not throw it
in the trash, pour it on the ground, or pour it down a drain.
Drain the oil while the engine is warm to assure rapid and complete
draining.
Open the maintenance cover to access the oil filler cap.
Place the generator horizontally on wooden blocks to make space
for placing a suitable container.
Remove the oil filler cap, oil drain bolt and sealing washer, and drain
the oil into the container.
Install a new sealing washer and the oil drain bolt, and tighten the
bolt securely.
When it is hard to fill the engine with oil, set the funnel contained in
the generator package to the oil filler port, and pour oil. Refill to the
upper limit mark on the dipstick with the recommended oil (see
page
). Tighten the oil filler cap securely. Close the maintenance
cover.
Wash your hands with soap and water after handling used oil.
1.5 L
1.7 L
1.
2.
3.
4.
5.
Without oil filter replacement: approximately
With oil filter replacement: approximately
44
11/12/06 12:57:01 42Z26700_045