Honda CRF450X, Руководство пользователя

Страница: 90 / 174

Suspension
Refer to Safety Precautions on page 25.
Loose, worn, or damaged suspension components
may adversely affect the handling and stability of
your CRF. If any suspension components appear
worn or damaged, see your Honda dealer for
further inspection. Your dealer is qualified to
determine whether or not replacement parts or
repairs are needed.
Front Suspension Inspection
• When your CRF is new, break it in for
approximately one hour to ensure that the
suspension has worked in (page 21).
• After break-in, test run your CRF with the
front suspension at the standard setting before
attempting any adjustments.
• For optimum fork performance, we
recommend that you disassemble and clean
the fork after riding your CRF for 3.0 hours.
See page 109 for fork disassembly.
• Replace the fork oil every 7.5 hours of
running. See page 87 for oil level adjustment
after changing the fork oil.
• Replace the damper oil every 22.5 hours of
running. See page 113 for oil level adjustment
after changing the damper oil.
• Use Honda ULTRA CUSHION OIL
SPECIAL 5W or an equivalent which
contains special additives to assure maximum
performance of your CRF’s front suspension.
• Periodically check and clean all front
suspension parts to assure top performance.
Check the dust seals for dust, dirt, and foreign
materials. Check the oil for any
contamination.
• Refer to suspension adjustment information
page 108 for make all rebound and
compression damping adjustments in one-
click increments. (Adjusting two or more
clicks at a time may cause you to pass over
the best adjustment.) Test ride after each
adjustment.
• If you become confused about adjustment
settings, return to the standard position and
start over.
• If the fork is still too stiff/soft after adjusting
compression damping, determine which
portion of the travel is still too stiff/soft. This
is an important step that will help you solve
suspension problems.
1. Make sure that the fork protectors (1) and dust
seals (2) are clean and not packed with mud
and dirt.
2. Check for signs of oil leakage. Damaged or
leaking fork seals should be replaced before
your CRF is ridden.
(1) fork protector (2) dust seal
3. Inspect the wear rings (3) for wear or damage.
Replace the wear ring if it is 2.0 mm (0.08 in)
or flat with the outer tube (4).
When replacing the wear ring, remove the
fork leg (page 109).
Install the wear ring with its end gap facing
rearward.
(3) wear ring (4) outer tube
(3) wear rings
4. Make a quick check of fork operation by
locking the front brake and pushing down on
the handlebar several times.
(2)
(1)
(4)
(3)
2.0 mm (0.08 in)
(3)
84
Servicing Your Honda
061-085.qxd 06.6.1 11:00 ページ84