Honda CRF250X, Руководство пользователя и соревновательное пособие

Страница: 62 / 180

Clutch System
Refer to Safety Precautions on page 2.
Clutch Freeplay
Cable End Adjustment
Minor adjustments are generally made with the
clutch cable end adjuster.
Cable end adjuster:
(2) cable end adjuster
(+) increase free play
(–) decrease free play
1. Turn the cable end adjuster (2) to obtain the
specified freeplay.
2. Check the freeplay again.
Integral Cable Adjustment
The integral cable adjuster is used if the cable
end adjuster is threaded out near its limit — or
the correct freeplay cannot be obtained.
(3) lock nut (+) increase
(4) integral cable adjuster (–) decrease
1. Turn the cable end adjuster counterclockwise
(to provide maximum freeplay).
2. Loosen the lock nut (3).
3. Turn the integral cable adjuster (4) to obtain
the specified freeplay.
4. Tighten the lock nut. Check the freeplay.
5. Start the engine, pull the clutch lever in, and
shift into gear. Make sure the engine does not
stall and the motorcycle does not creep.
Gradually release the clutch lever and open
the throttle. Your motorcycle should move
smoothly and accelerate gradually.
If you can’t get proper adjustment, or the clutch
does not work properly, the cable may be kinked
or worn, or the clutch discs may be worn. See
your Honda dealer or refer to the official Honda
Service Manual (page 164).
(1) clutch lever
Inspection
Check freeplay.
Freeplay:
3/8 – 3/4 in (10 – 20 mm)
If necessary, adjust to the specified range.
Improper freeplay adjustment can cause
premature clutch wear.
56
Servicing Your Honda
(1)
(–)
(+)
(2)
(+)
(–)
(3)
(4)