Honda CRF250X, Руководство пользователя и соревновательное пособие

Страница: 56 / 180

Coolant Replacement
Refer to Safety Precautions on page 2.
Coolant should be replaced by your Honda
dealer, unless you have the proper tools and
service data and are mechanically qualified.
Refer to the Honda Service Manual (page 164).
Coolant
WARNING
Removing the radiator cap while the
engine is hot can allow the coolant to
spray out, seriously scalding you.
Always let the engine and radiator cool
down before removing the radiator cap.
50
Servicing Your Honda
To properly dispose of drained coolant, refer to
You & the Environment, page 141.
Coolant System Bleed Air
1. Remove the radiator cap (1).
(1) radiator cap
2. Fill the system with the recommended coolant
through the filler opening up to filler neck.
Use a fresh recommended coolant mixture
(page 48).
Capacity:
1.19 US qt (1.13
R
)
3. Turn the quick fastener (2) counter clockwise.
4. Remove the left side cover bolt (3), seat bolt
(4), collars (5) and left side cover (6).
5. Remove the radiator reserve tank cap (7) and
fill the reserve tank to the UPPER level line
(8).
(2) quick fastener (6) left side cover
(3) left side cover bolt (7) radiator reserve tank cap
(4) seat bolt (8) UPPER level line
(5) collars
6. Bleed air front the system as follows:
• Shift the transmission into neutral. Start the
engine and let it idle 2-3 minutes.
• Snap the throttle 3-4 times to bleed air from
the system.
• Stop the engine and, if necessary, add
coolant up to the proper level. Reinstall the
radiator cap.
• Check the level of coolant in the reserve
tank and fill to the UPPER level if it is low.
7. Install the radiator reserve tank cap and left
side cover.
(1)
(8)
(7)
(5)
(4)
(6)
(5)
(2) (3)