Honda Cr-v 2007, Руководство пользователя, Страница: 184 / 552

To lock any passenger’s door when
getting out of the vehicle, pull the
lock tab rearward and close the door.
To lock the driver’s door, remove the
key from the ignition switch, pull and
hold the outside door handle, and
pull the lock tab rearward or push
the top of the master door lock
switch, then close the door. The security system activates after
you lock the doors and the tailgate
with the lock tab on the driver’s door
or the master door lock switch (see
page
).
With any door or the tailgate open
and the key in the ignition, locking
with master door lock switch is
disabled. The lock tab on the driver’s
door is not disabled if the driver’s
door is closed. Pulling the driver’s
lock tab rearward will lock all doors
and the tailgate. If you try to lock an
open driver’s door by pulling the lock
tab rearward with the outside handle
pulled, the lock tabs on all doors pop
out and unlock the doors.
When you lock the doors and the
tailgate with the key or the remote
transmitter, all outside turn signals
and both indicators in the instrument
panel flash three times to verify the
doors and the tailgate are locked and
the security system has set (see
page
).
All doors and tailgate lock or unlock
when you use the key to lock or
unlock the driver’s door.
279
279
CONTINUED
On vehicles with security system
Door Locks
Instruments and Controls
Lockout Prevention
179
06/09/13 17:17:10 32SWA600_184