Honda Cr-v 2007, Руководство пользователя

Страница: 156 / 552

When your selection is successfully
completed, the display shows
‘‘SETUP ON’’ or ‘‘SETUP OFF’’ for a
few seconds, then goes back to the
‘‘CHG SETTING’’ display. Press the
SEL/RESET button, then press the
INFO button repeatedly to select
another customizing mode.
If you fail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display for a few seconds. The
display returns to the setting mode.
Repeat the setup.
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display will
return to the normal display.
To cause the elapsed time to reset
every time you turn the ignition
switch to the LOCK (0) position or
reset the trip meter A or B, adjust it
as described as follows.
While the multi-information display
is showing ‘‘ELAPSED TIME
RESET,’’ press the SEL/RESET
button. The display changes to the
setting display.
CONTINUED
Multi-Information Display
Instruments and Controls
Elapsed Time Reset
151
06/09/13 17:13:24 32SWA600_156