Door-activated position: Interior lights come on when any of the doors are
opened, the driver’s door is unlocked, or the vehicle is turned off.
OFF position: Interior lights remain off.
n
Map Lights
Press the front map lights to turn on or off.
n
Exterior Lights
Rotate the switches on the lever to operate the exterior lights. Push the
lever forward to turn on the high beams. Return the lever to its original
position for low beams.
OFF: All exterior lights are off.
Turn on exterior lights except headlights.
AUTO: Turn on the automatic lighting feature. Headlights turn on or off
depending on ambient brightness when the vehicle is on.
Headlights automatically come on after the wipers are engaged for
a certain time. The headlights come on when you unlock a door in
dark areas with the headlight switch in AUTO.
Turn on all exterior lights including headlights.
VEHICLE CONTROLS
34 |
Turn fog lights
*1
on or off.
One-Touch Turn Signal
Use this quick and convenient method to
signal a lane change.
Lightly push the turn signal lever up or
down for a three-blink sequence.
For a continuous signal, push the lever up
or down until it locks into place.
Auto High Beam
*1
The front sensor camera detects the light sources ahead of the vehicle such as
the lights of a preceding or oncoming vehicle, or street lights. When you are
driving at night, the system automatically switches the headlights between low
beam and high beam depending on the situation.
For the system to work properly:
• Do not place an object that reflects light on the dashboard.
• Keep the windshield around the camera clean. When cleaning the
windshield, be careful not to apply windshield cleanser to the camera lens.
• Do not attach an object, sticker or film in the area around the camera.
• Do not touch the camera lens.
If the camera receives a strong impact or requires repair, consult a dealer.
If you see the message “Some Driver Assist Systems Cannot Operate: Clean
Front Windshield", park your vehicle in a safe place. Wipe away debris blocking
the windshield, then start driving again. If the message remains even after
driving for a while with the clean windshield, have your vehicle checked by a
dealer.
*1 - If equipped
VEHICLE CONTROLS
| 35