Canadian Models Only
If the washer fluid is low, a message appears on the Driver Information
Interface.
Brake/Clutch
*1
Fluid
The fluid level should be between the MIN and MAX marks on the side of the
tank. We recommend using Honda Heavy Duty Brake Fluid DOT 3.
Use the same fluid for both the brakes and clutch
*1
.
Pour the fluid carefully.
Manual Transmission Models
The brake fluid reserve tank is also used for your vehicle’s clutch fluid. As long
as you keep the brake fluid level as instructed above, there is no need for
checking the clutch fluid level.
If the fluid level is at or below the MIN mark, have a dealer inspect for leaks or
worn brake pads as soon as possible.
Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system
and can cause extensive damage.
Changing Wiper Blades
If the wiper blades leave streaks across the windshield, try cleaning them first
with a paper towel or soft cloth and wiper fluid. If the wiper blade rubber has
deteriorated, you should change the wiper blades.
1. Set the power mode to VEHICLE OFF.
*1 - If equipped
MAINTENANCE
132 |
2. Lift the driver side wiper arm first, then
the passenger side.
3. Press and hold the tab, then slide the
holder off the wiper arm.
4. Pull the wiper blade to the opposite
direction to slide it out from its holder.
5. Insert the flat side of the new wiper
blade onto the bottom part of the holder.
Insert the blade all the way.
6. Install the end of the wiper blade into
the end cap.
7. Slide the wiper holder onto the wiper
arm securely.
8. Lower the passenger side wiper arm
first, then the driver side.
9. Set the power mode to ON and hold the wiper switch in the MIST positions
until both wiper arms return to the standard position.
Avoid dropping the wiper arm, as it may damage the windshield.
MAINTENANCE
| 133
