Classic Cycles Technical Resources
23
Stoplight Switch Adjustment
Check the operation of the stoplight (1) switch periodically. The switch is located on the
right hand side behind the engine.
Adjustment is done by turning the adjusting nut (2). Turn the nut in the direction (A) if
the switch operated too late and in the direction (B) if the switch operates too soon.
Tool Kit
The tool kit is in the storage compartment behind the left side cover. To open the storage
compartment cover (2), insert and turn the cry (1) counter clockwise. Some roadside
repairs, minor adjustments and parts replacement can be performed with the tools
contained in the kit.
•
10 x 12 mm box end wrench
•
8 mm hex wrench
•
27 mm box end wrench
•
10 x 12 mm open end wrench
•
No 2 screwdriver
•
Handle for box end wrench
•
14 x 17 mm open end wrench
•
No 2 phillips screwdriver
•
Spark plug wrench
•
Pliers
•
Screwdriver grip
•
Feeler gauge 0.7 mm
•
5 mm hex wrench
•
8 mm open end wrench
•
Tool bag
•
6 mm hex wrench
•
22 mm box end wrench
Serial Number
The frame and engine serial numbers are required when registering your motorcycle.
They may also be required by tour dealer when ordering repl acement parts. Record the
numbers here for your reference.
The frame number (1) is stamped on the right side of the steering head.
The engine number (2) is stamped on top of the crankcase.
FRAME NO.
ENGINE NO.
