wwwClassicCyclesOrg
10
Tail/Stoplight Warning Light
The tail/stoplight warning light (1) lights when the tail/stoplight bulb is burned out. It
should light for a few seconds and go out when the ignition switch is turned ON.
Tachometer Red Zone
CAUTION:
•
Never allow the tachometer needle to enter the red zone, even after the engine
has been broken in.
•
Be careful when blipping or accelerating in the 1
st
or 2
nd
gear as the needle will
enter the red zone easily.
The red zone indicates (1) the maximum engine speed limit and running the engine in
this range will adversely affect its service life.
Tripmeter
Use the trip meter to calculate mileage on trips. Reset to zero with the knob (2).
Ignition Switch
The ignition switch is located directly below the indicator panel.
OFF: All electric circuits open. Engine cannot be started. Key can be removed. (Key
cannot be removed: ND, G)
ON: All electric circuits closed. Engine and light can be operated. Key cannot be
removed.
P (PARKING): All electric circuits open except for tail light and position light. Key can
be removed.
LOCK (STEERING LOCK)
