4.
Turn clockwise to increase spring preload
(hard), or turn counterclockwise to
decrease spring preload (soft).
The standard position is the 2 turns from
the full soft position.
NOTICE
Do not turn the adjuster beyond its limits.
Adjust both left and right forks to the same
spring preload.
5.
After the adjustment, connect the front
suspension connector.
u
Be careful not to allow water or dust to
enter the connector.
u
Make sure to install the connector
completely.
6.
Connect the front suspension connector
to the coupler clip and then install the
connector cover.
20191113122725_32MKR8000_eng_BOOK Page 190 Wednesday, November 13 2019 12:40:27 JST
Other Adjustments
u
Adjusting the ÖHLINS Smart EC System
Maintenance
187
Continued