Engine Oil
u
Changing Engine Oil & Filter
94
Mainten
a
nce
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
motorcycle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
1.
Remove the skid plate.
2
P. 90
2.
If the engine is cold, idle the engine for 3
to 5 minutes.
3.
Turn the ignition switch off and wait for
2 to 3 minutes.
4.
Place your motorcycle on a firm, level
surface.
5.
Place a drain pan under the drain bolts.
6.
Remove the oil fill cap, drain bolts, and
sealing washers to drain the oil.
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u
Discard the oil and oil filter at an
approved recycling centre.
NOTICE
Using the wrong oil filter can result in serious damage to
the engine.
Sealing washers
Drain bolts
16 CRF1000 A D (TH)-32MJP8000.book 94 ページ ２０１６年８月１０日 水曜日 午後３時３１分
