Removing & Installing Body Components
u
Front Seat
89
Mainten
a
nce
Insert the rear prong into the rear lower
slot on the rear carrier.
2.
Insert the front lower prong into the front
stay.
Insert the front upper prong into the front
stay.
3.
Push down on the centre of the front seat
until it locks in place.
Make sure that the front seat is locked
securely in position to pull it up lightly.
The seat locks automatically when installed.
Take care not to lock your key in the
compartment under the front seat.
When setting the low seat position:
Low position:
Front upper prong
Rear prong
Front
seat
Front stay
Lower slot
When setting the high seat position:
When setting the low seat position:
16 CRF1000 A D (TH)-32MJP8000.book 89 ページ ２０１６年８月１０日 水曜日 午後３時３１分
