Honda Acura NSX 1991, Руководство по обслуживанию

Страница: 172 / 1420

10. Fill the expansion tank with coolant.
Tighten the bleeders in sequence: cover
bleed bolt, radiator bleed plug, heater pipe bleed
cap and water pipe bleed bolt as coolant starts to
run out in a steady stream without bubbles.
11, After tightening all the bleeding bolts, plug and
cap, fill the expansion tank with coolant up to MAX
line.
12. Reloosen the cover bleed bolt to remove air
again.
13. When bleeding is completed, retighten the
cover bleed bolt and fill the expansion tank up to
0.5 (0.53 US qt, 0.44 Imp qt) or 30 mm (1.2 in)
over the MAX line.
B L E E D P L U G
14. Install the expansion tank cap and turn it 60
degrees (where the first lock tab of filler neck is
engaged).
15. Start the engine and let it run until warmed up (until
the thermostat opens and the radiator cooling fan
runs).
16. Turn off the engine. Check the expansion tank and,
if needed, add coolant to bring it up to the MAX
line.
17. Tighten the expansion tank cap securely.
18. Reinstall the cover on the car’s underside.
(1.0
kg-m,
BLEED BOLT
10 (1.0 kg-m,
COVER