86
Navigation System
System Set-up
Either select
Address
or
Map Input
on the
Enter avoid area by
screen.
Each choice provides a slightly different
way to locate the approximate map
display for drawing the area you wish to
avoid. After selecting the choice, a
map
screen will be displayed.
Use the
ZOOM
buttons to select the
map scale (available scales are 1/20, 1/
8, and 1/4 mile scales).
Use the joystick to move the crosshairs
(red circle) to the desired start point and
push in the joystick to “set” the start
point. Then move the joystick in a
straight or diagonal direction to
encompass the area to be avoided.
NOTE:
The maximum size of the “Avoid area”
is 1/4 of the navigation display screen
regardless of the map scale setting.
The selected area will be displayed as a
shaded box with an orange border. Push
in on the joystick to set the end point of
the avoided area. To “re-draw” the area,
touch
Cancel
and repeat the area
selection process. If your selected area
contains a freeway, the system will
prompt you with a pop-up box saying,
“Do you want to avoid freeways?”
Answering “No” allows you to enter a
route through an avoided area on a
freeway, and skip the “Avoid area
caution box” (see
Pop-ups and
Disclaimers
on page
61
).
Say or select
Done
to return to the
Edit
area
screen. When you return, the
“Vicinity” field is automatically filled in
by the system. Re-edit the area “Name”
if desired. Select
Done
on the
Edit
avoid area
screen to finish editing.
Your new avoided area will now appear
on the “Avoid area” list screen, and be
viewable on the
map
screen.
2008 Civic Hybrid
