−
−
−
−
−
−
−
−
±
±
Select the outside temperature
display, then press and hold the
select/reset knob for 10 seconds.
The following sequence will appear
for 1 second each: 0, 1, 2, 3, 4, 5,
5,
4,
3,
2,
1, 0 (U.S.) or 0, 1, 2,
3,
3,
2,
1, 0 (Canada).
NOTE: The temperature must be
stabilized before doing this
procedure.
If the outside temperature is
incorrectly displayed, you can adjust
it up to
5°F in U.S. models (
3°C
in Canadian models) warmer or
cooler.
The sensor delays the display update
until it reaches the correct outside
temperature. This may take several
minutes.
The temperature sensor is in the
front bumper. Therefore, the
temperature reading can be affected
by heat reflection from the road
surface, engine heat, and the
exhaust from surrounding traffic.
This can cause an incorrect
temperature reading when your
speed is under 19 mph (30 km/h).
This indicator displays the outside
temperature in Fahrenheit (U.S.
models) or Centigrade (Canadian
models). To see the outside
temperature, press and release the
select/reset knob until the
temperature is displayed.
When the temperature reaches the
desired value, release the select/
reset knob. You should see the new
outside temperature displayed.
In certain weather conditions,
temperature readings near freezing
(32°F, 0°C) could mean that ice is
forming on the road surface.
If equipped
Outside Temperature Indicator
Gauges
66
０７／０８／０６ １２：１６：２４ ３１ＴＥ０６００ ００７１
