Check the fluid level with the
transmission at normal operating
temperature and the vehicle sitting
on level ground.
To check the transmission fluid level,
remove the 3 under cover holding
clips with a flat-tip screwdriver, then
pull out the driver’s side under cover
carefully.
Remove the check bolt and look for
transmission fluid coming out of the
bolt hole. If a small amount of fluid
drips out of the bolt hole, reinstall
the check bolt.
If no fluid comes out, remove the
filler bolt. Slowly add Honda Manual
Transmission Fluid (MTF) until it
starts to run out of the check bolt
hole.
V6 models
Transmission Fluid
316
FILLER BOLT
WASHER
CHECK BOLT
DRAIN BOLT
07/08/06 12:50:02 31TE0600 0321