CONTINUED
Step back to check the alignment
of the logo. If needed, pivot the
cover until the logo is straight.
Hold the cover at the 10 o’clock
and 2 o’clock positions, then place
the top of it over the spare tire.
Starting at the top of the tire,
position the outside seam of the
cover slightly over the outside
edge of the tire. Pull the cover on,
a little at a time, and alternate side
to side along the tire until you
reach the bottom.
23.
24.
25.
If equipped
Changing a Flat Tire
Sof t vinyl spare tire cover
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
213
OUTSIDE SEAM
Make sure the cover is at room
temperature bef ore you install it. If it’s
too cold, it won’t f it easily over the tire.
０４／０７／０２ １５：４５：０７ ３１Ｓ９Ａ６３０ ０２１８
