−
−
−
○
○
−
−
＋
−
XM is a registered trademark of
XM Satellite Radio, Inc.
Satellite radio is available in U.S.
models only.
Your vehicle is capable of receiving
XM Satellite Radio anywhere in the
United States except Hawaii and
Alaska.
The ignition must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on:
Push any of the following: PWR/
VOL knob or the CD/XM button.
Turn the PWR/VOL knob to adjust
the volume.
Press and release this
button to change the display. The
display will change in the following
sequence: channel name, channel
number, category, artist name, and
music title.
Press and hold this button for more
than 2 seconds to change the mode
between the channel number and the
category.
When in the satellite radio mode,
you can use any of three methods to
find channels: TUNE, SEEK/SKIP,
and SCAN.
Turn the TUNE knob to
change channel selection. Turn the
knob right for higher numbered
channels and left for lower
numbered channels.
The SEEK/SKIP
function selects the various
categories in XM, such as Jazz/Blues,
Rock, Classical, etc. Push the
to
change the category forward. Push
the
to change the category
backward. To search for channels
within a category, turn the TUNE
knob clockwise.
The SCAN function
samples all channels for 5 seconds.
To activate the function, push the
SCAN button. Push it again to get
out of the sequence.
Each preset button can
store one channel in XM1 and one in
XM2.
Push the CD/XM button, you will
see XM1 or XM2.
Use the TUNE, SEEK or SCAN
function to tune the radio to a
desired channel.
Pick a preset button and hold it
until you hear a beep.
Repeat steps 1 to 3 to store a total
of six stations on XM1 and six on
XM2.
1.
2.
3.
4.
Satellite Digital Radio
To Play XM Satellite Radio
DISP
To Select a Channel
TUNE
SEEK/SKIP
SCAN
Preset
Playing the XM Satellite Radio (optional)
Fe
a
tu
re
s
Optional on U.S. EX and SE models
109
０４／０７／０２ １５：２７：５３ ３１Ｓ９Ａ６３０ ０１１４
