The jack is behind a cover in the
right fender. Remove the cover by
turning the handle counterclock-
wise, then pulling on the cover.
Turn the jack’s end bracket
counterclockwise to loosen it, then
remove the jack.
Loosen each wheel nut 1/2 turn
with the wheel wrench.
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
6.
7.
8.
9.
Changing a Flat Tire
248
JACK
JACKING POINT
04/05/27 18:23:39 31SDA620 0251
Main Menu
Table of Contents
▲
▼