Install a new oil filter according to
the instructions that come with it.
Refill the engine with the recom-
mended oil.
Engine oil change capacity
(including filter):
(4-cylinder models)
(6-cylinder models)
Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator should go out within 5
seconds. If it does not, turn off the
engine and check your work.
Let the engine run for several
minutes, then check the drain bolt
and oil filter for leaks.
Turn off the engine, let it sit for
several minutes, then check the oil
level on the dipstick. If necessary,
add more oil.
(6-cylinder models)
(4-cylinder models)
Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten it to:
Make sure to clean off any dirt
and dust on the connecting
surface of a new oil filter.
9.
8.
7.
6.
4.
5.
Changing the Oil and Filter
Ma
int
e
na
nce
215
OIL FILTER
6-cylinder models
OIL FILTER
4-cylinder models
4.4 US qt (4.2 )
4.5 US qt (4.3 )
29 lbf·ft (39 N·m , 4.0 kgf·m)
33 lbf·ft (45 N·m , 4.6 kgf·m)
Improper disposal of engine oil can be
harmf ul to the environment. If you
change your own oil, please dispose of
the used oil properly. Put it in a sealed
container and take it to a recycling
center. Do not discard it in a trash bin
or dump it on the ground.
０４／０５／２７ １８：１８：００ ３１ＳＤＡ６２０ ０２１８
Main Menu
Table of Contents
▲
▼
