Install the new bulb and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector onto
the bulb.
Put the inner fender cover in place.
Install the two holding clips. Lock
each one in place by pushing on
the center.
Turn on the headlights to test the
new bulb.
Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver’s side bulb, turn
the steering wheel to the right.
Pull the inner fender cover away
from the fender and bumper.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
1.
3.
2.
4.
8.
7.
6.
9.
CONTINUED
Lights
Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb
Ma
int
e
na
nce
229
HOLDING CLIPS
BULB
０４／０５／２７ １８：２０：２１ ３１ＳＤＡ６２０ ０２３２
Main Menu
Table of Contents
▲
▼
