−
−
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset bars.
The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pressing the PWR/
VOL knob, or the AM or FM button.
Adjust the volume by turning the
knob.
Use the TUNE bar to tune
the radio to a desired frequency.
Push the
on the TUNE bar to
tune to a higher frequency, or push
the
to tune to a lower frequency.
Hold the bar down until the display
reaches the desired frequency.
The SEEK function
searches the band for a station with
a strong signal. To activate it, press
the SEEK bar (
or
), then
release it. Depending on which side
of the SEEK bar you press, the
system scans upward or downward
from the current frequency. It stops
when it finds a station with a strong
signal.
CONTINUED
Operating the Radio
TUNE
SEEK
Audio System
Comf ort and Convenience Features
151
