Lights
1. Open the hood.
If you need to change the head-
light bulb on the driver's side,
remove the power steering
reservoir tank by pulling it out of
its holder.
2. Remove the electrical connector
from the bulb by squeezing the
connector on both sides to unlock
the tab. Pull the connector straight
off.
3. Remove the rubber weather seal
by pulling on the tab.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way and remove the bulb.
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place and clip the end into
the slot.
6. Install the rubber seal over the
back of the headlight assembly.
Make sure it is right side up; it is
marked "TOP".
7. Push the electrical connector onto
the tabs of the new bulb. Make
sure it locks in place.
Turn on the headlights to test the
new bulb.
8. (Driver's side)
Reinstall the power steering
reservoir.
Maintenance
HOLDER
WEATHER SEAL
BULB
CONNECTOR
HOLD-DOWN WIRE
Main Menu
Table of Contents
▲
▼
Содержание 1998 Civic
Страница 146: ...Required Maintenance Record for Normal and Severe Schedules Maintenance Main Menu Table of Contents...
Страница 217: ...Fuses INTERIOR FUSE BOX On Canadian models CONTINUED Taking Care of the Unexpected Main Menu Table of Contents...
Страница 218: ...Fuses UNDER HOOD FUSE BOX ABS FUSE BOX Taking Care of the Unexpected Main Menu Table of Contents...