background image

8 of 8

AII07632-01 (1711)

© 2017 American Honda Motor Co., Inc. – All Rights Reserved.

USE AND CARE

• The weight of the cargo must not exceed the maximum 

weight capacity of 13.4 lbs (6.1 kg). Determine the 
maximum number of skis or snowboards that can 
mounted to the ski / snowboard attachment as shown.

QG11922AG

MAX: 4

MAX: 6

MAX: 6

SNOWBOARDS

SKIS

• Remove the ski / snowboard attachments when they 

are not in use.

• Do not go through an automatic car wash with the ski / 

snowboard attachment installed.

• The ski / snowboard attachment raises the overall 

height of the vehicle. Pay attention to overhead 
obstacles when driving with the ski / snowboard 
attachment.

• Do not use the ski / snowboard attachments for the 

other purposes. Do not exceed maximum weight 
capacity.

• Be extremely careful not to damage the roof and other 

finished surfaces of the body when installing the ski / 
snowboard attachments and skis or snowboards.

• Before and after driving, or after loading skies or a 

snowboard on the attachment, check the security of the 
attachment mounts and retighten them as necessary.

PRECAUTION

• Avoid sudden starts or stops with the attachments on 

the vehicle. It may cause the bolts and other fasteners 
to loosen.

• Obey local laws and regulations.

• Before driving, check that the attachments are firmly 

attached regardless of whether or not skis/snowboards 
are mounted on the attachment.

• Only use the ski / snowboard attachments with vehicles 

that specify that it can be applied.

Содержание 08L03-E09-100C









Отзывы: