© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
AII 00273 (1410)
31 of 35
Check the operation of the Remote Control Engine Starter
Operating Conditions
• The hood is closed
• The shift lever is in park
• Turn the ignition switch off and the key is outside the vehicle
• All doors and tailgate closed and locked
Inspection
1.
Press the engine/command button on the transmitter and release, within 2 seconds, press the lock/start button on
the transmitter.
The engine should start if all operating conditions are met.
Does the engine start?
Yes - Operation is normal.
No:
• Make sure all “Operating Conditions” are met.
• Check the engine starter harness connections.
• Connect the HDS/MVCI and check for an indicated failure.
(Refer to the appropriate Service Manual for details.)
B127121H
ENGINE/
COMMAND
BUTTON
UNLOCK/
STOP
BUTTON
RECEPTION
INDICATOR
CHECKING
INDICATOR
ENGINE START
OPERATION
Blinking
ENGINE
RUNNING
INDICATOR
IN-CAR
TEMPERATURE
*1
REMAINING
IDLING TIME
*1
*1 Only on vehicles equipped with the automatic climate control.
This indicator is displayed for some vehicles among them.
LOCK/
START
BUTTON
2.
Press the engine/command button on the transmitter
and release, within 2 seconds, press the unlock/stop
button. The engine should stop.
Does the engine stop?
Yes - Operation is normal.
No - Check the engine starter harness connections.
3.
After the engine has stopped, start the engine again,
and check that the engine stops after each of the
following conditions:
NOTE: After each test the ignition key must be cycled, or the
driver’s door must be opened and closed.
•
Move the shift lever out of the P position.
•
Unlock or open the doors or the tailgate.
•
Open the hood.
•
Turn the engine switch.
•
Press on the brake pedal.
Does the vehicle system stop after each of these tests?
Yes - Operation is normal.
No - Check the engine starter harness connections.
4.
Check that the power windows and the moonroof do not function, and the shift lever does not move to any position
when the vehicle system is started with the transmitter.
5.
Check that the engine does not start under “Operating Conditions” with the key left inside the vehicle.
6.
Start the vehicle system again, press the engine/command button on the transmitter two times, and check the
vehicle condition on the display.
7.
Check the operation of the transmitter when the vehicle is 120 m (400 ft.) away and in direct sight.
