28 of 35
AII 00273 (1410)
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
97. Using isopropyl alcohol on a shop towel, thoroughly
clean the hood where the caution label will attach.
Q0N2011AG
ADHESIVE
BACKING
(Remove.)
CAUTION
LABEL
HOOD
(Clean with
isopropyl alcohol.)
98. Remove the adhesive backing from the caution label,
and attach the caution label to the hood in the area
shown.
99. Check that all wire harness and cables are routed
properly and that all connectors are plugged in.
100. Reinstall all removed parts.
101. Reconnect the negative cable to the battery.
102. Check the operation of the headlights and wipers.
103. Press and hold the radio power button for two
seconds to restore the radio and navi (if equipped)
system functions.
104. Reset the clock on vehicle without navigation.
105. Proceed to the REMOTE ENGINE STARTER
REGISTRATION (Page 28) and Check the
operation of the Remote Control Engine Starter
(Page 31).
REMOTE ENGINE STARTER REGISTRATION
NOTE: Register after making sure the HDS has been
upgraded to the latest version as described in the Service
News.
1.
Acquire the PCM Code from the Interactive Network.
QC31909AC
CAR ICON
2.
Connect the HDS/MVCI tester to the OBD II data link
connector, then turn the engine switch to the on (II)
position.
3.
Start the HDS, and click the car icon.
4.
Input the VIN and other required information into the
HDS, then click the check button.
QB32102BH
Input the VIN and other
required information.
CHECK BUTTON
5.
Select Honda Systems, then click the check button.
