© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
AII 50823 (1312)
3 of 14
INSTALLATION
Customer Information:
The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
1.
Disconnect the negative cable from the battery.
2.
Remove the passenger’s sunvisor holder.
Q082007AK
PASSENGER’S
SUNVISOR HOLDER
(Rotate.)
PASSENGER’S
SUNVISOR
3.
Wrap the end of a flat-tip screwdriver with tape.
Locate the slot in the bracket cover, and insert a flat-
tip screwdriver into the slot. Push the hook with the
flat-tip screwdriver.
Q091503BK
PASSENGER’S
SUNVISOR
FLAT-TIP
SCREWDRIVER
TAPE
BRACKET COVER
Push the
hook.
HOOK
While pushing in on the hook, rotate
the sunvisor backward about 45°.
Make sure the hook slides
into the bracket cover.
FRONT
4.
While pushing in on the hook, rotate the passenger’s
sunvisor backward about 45°. Make sure the hook
slides into the bracket cover.
NOTE: If the hook did not stay pushed in, return the
passenger’s sunvisor to its original position and
repeat steps 3 and 4.
