2 of 10
08B08-MCH-1000-91
©
2006 American Honda Motor Co., Inc - All Rights Reserved.
TORQUE CHART
Tighten all screws, bolts and nuts to their specified torques.
Refer to the Service Manual for the tightening torques of
removed parts.
Item
N·m
kgf·m
Ibf·ft
5 mm screw
4
0.4
2.9
6 mm SH flange bolt
9
0.9
6.5
6 mm socket bolt
10
1.0
7
INSTALLATION
NOTE:
• Disconnect the negative cable from the battery before
installing this accessory.
• Trim the excess ends off the wire ties after attaching
them to the wire harnesses. Do not allow the cut part
of the wire tie to interfere with any harness or brake
hose.
• Be sure to observe all safety notes and precautions
described in the Service Manual while removing and
installing the fuel tank. Gasoline is extremely
flammable and is explosive under certain conditions.
Refuel in a well-ventilated area with the engine
stopped. Do not smoke or allow flames or sparks in
the area where gasoline is stored or where the fuel
tank is refueled.
1.
Refer to the Service Manual to remove the parts.
BOLT
WASHER
FRONT TOP COVER
NUT
LEFT SIDE
COVER
SEAT
STAY
LEFT CRANKCASE
REAR COVER
BOLT
WASHER
NUT
BOLT
BOLT
BOLT
TOOLS AND SUPPLIES REQUIRED
Socket (8 mm)
Ratchet
Hex wrench (5 mm)
Phillips
®
screwdriver
Cutting pliers
Isopropyl alcohol
Shop towel
Torque wrench
Untitled-3
11/2/2006, 9:03 AM
2
