10 of 10
08B08-MCH-1000-91
©
2006 American Honda Motor Co., Inc - All Rights Reserved.
17. Sit on the motorcycle and adjust the speaker so it
faces toward you. Tighten the speaker holders
securely.
• Move the handlebar right and left and check
that the harnesses are not pinched by
components and that they are not pulled taut.
UPPER
LOWER
Tighten the upper bolt first, then tighten the lower bolt.
HOLDER
SPEAKER
Align the center of the speaker with the
center of the motorcycle and secure it.
18. Install the removed motorcycle parts in the reverse
order of removal.
SPEAKER
SURFACE
19. Connect the sub cord as shown when it is used.
21. Check the controller, speaker, headlight and the other
lights for proper operation. Check that the harnesses
are not pulled taut.
JACK HOLDER
SUB CORD
CLIP
Thoroughly clean the
area where the clip will
be attached and remove
the adhesive backing
before attaching.
20. Install the clip on the sub cord and attach it to the
motorcycle in a way that it does not interfere with riding
the motorcycle.
Untitled-3
11/2/2006, 9:03 AM
10
