6 of 9
All 30528 (0509)
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
20. Locate the vehicle 14-pin connector taped the
body panel, and remove the cushion tape to the
free connector. Plug the vehicle 14-pin connector
into the XM radio unit.
Installing the XM Radio Antenna
21. Insert the XM radio antenna connector through
the hole of the roof panel, and route the XM radio
antenna connector out the back of the roofliner.
Position XM radio antenna onto the roof panel.
Be careful not to bend the headliner.
NOTE: If the stud-bolt from the XM radio antenna
interferes with the inner panel between the roof
panel and headliner, push the inner panel forward
to install the XM radio. If the stud-bolt interferes
with the inner panel even though the panel is
pushed forward, slit the inner panel, and install the
XM radio antenna.
22. Use the nut removed in step 14, and install the nut
onto the XM radio antenna. Torque the nut to 8
N·m (11Ib-ft). Be careful not to pinch the XM radio
antenna cable.
4407021K
CUSHION TAPE
(Remove.)
BODY
PANEL
XM RADIO
UNIT
VEHICLE 14-PIN
CONNECTOR
19. Route the XM radio assembly in back of the fuel
lid opener cable and the drain tub, and place the
XM radio assembly into the body panel. Set the
two 6 x 12 mm washer-bolts into the elongated
holes in the body panel. Tighten the two 6 x 12
mm washer-bolts.
4407011K
ELONGATED
HOLE
6 x 12 mm
WASHER-BOLT
XM
RADIO
UNIT
6 x 12 mm
WASHER-BOLT
ELONGATED
HOLE
VEHICLE
PANEL
DRAIN TUB
FUEL LID
OPENER
CABLE
4407032K
XM RADIO
ANTENNA
CONNECTOR
ROOF PANEL
XM RADIO
ANTENNA
FRONT
ROOF PANEL
STUD-BOLT
FRONT
Slit
INNER
PANEL
HEADLINER
INNER PANEL
(Push forward.)
ROOF
PANEL
NUT (Reuse.)
Torque the nut to 8 N·m (11 Ib-ft)
HEAD
LINER
