HONDA marine BF115J, Руководство пользователя

Страница: 48 / 170

47
CONTROLS AND FEATURES
Mechanical wire type:
1. Stopping the engine.
2. Setting the gearshift at F or R.
3. Turning the ignition switch ON.
The buzzer will sound once.
4. Pressing the emergency stop switch
5 times within 20 seconds.
When using the switch panel without
indicators type, within 20 seconds,
pull and insert the emergency stop
switch clip, or remove the clip and
pull the emergency stop switch 5
times.
The buzzer will sound once when
the hour counter is reset.
Periodic maintenance is required
when either the operating hours or the
time since last maintenance reaches
the prescribed limit. Therefore,
periodic maintenance may be
required based on the number of
months since the last maintenance
before the alert based on engine
operating hours displays (see
Maintenance Schedule on page 121).
Reset the hour counter whenever
maintenance is performed, whether
based on the time interval or the
number of operating hours.
<Operating hour notification timing>
<Display>
Steps 1 2 3 4
Outboard
motor
—
Ignition switch
ON
Start engine Gear at F or R
Display Switch ON — — —
Maintenance
indication on
display
Not shown Shown Shown Not shown
Every 100 hours
100 hours
after reset
80 hours
after reset
20
hours
Start of
operation
Notify Notify Notify
Maintenance
indication
Maintenance
indication
Maintenance
indication
Maintenance
indication
32ZVT600.book 47 ページ ２０２１年１０月１５日 金曜日 午後４時９分