Honda Electronics HONDEX HE-773-Di, Руководство по эксплуатации

Страница: 19 / 25

Add some water for smoothing O-ring and trunk pipe. Insert the joint pipe into trunk
pipe carefully without causing any damage onto soundome. Keep pushing the joint pipe
until the location of trunk pipe reaches the fixation position.
Fix the trunk pipe and electric hoist with 4pcs 5x12 tapping screws. (Min 3pcs)
Initial Set-up
Refer to the operating manual for the initial set-up of main unit.
Software ver.1.19 or later is required for the usage of electric hoist.
Select “Auto” for “Auto Hoist”.
Wiring
Power cable is connected to battery via breaker.
(Breaker is in OFF status.)
Upper/Lower signal cable is to be conned to 8p connector of HE-773-Di.
(Power has to be set to OFF before the connection.)
Electric Hoist Wiring
18
Ele. Hoist
Signal Cable
4P connector
Ele. Hoist
Power Cable
3P connector
Insert the cable
to the path.