Insert the joint pipe into trunk pipe carefully so that no scratch is on the soundome
surface. Execute the temporary fixation.
At this stage, no need to joint the hoist and trunk pipe since O-ring is ON.
Again, recheck the bow direction is correct against the fixation position of hoist.
Lastly, remove the parts from trunk pipe.
Final tightening of clamping screws
Fix the nut with screw wrench from the opposite side and tighten the screws
.
Use 4x10 tapping screw for fixation.
Use the center-hole on the right.
Remove the cable clamp and fix the cable.
Place the PCB back to the original location and fix it with 6 screws.
14
Содержание HONDEX HE-773-Di
Страница 1: ......
Страница 13: ...Insert O ring Insert the rubber bush into transducer part Insert the cable of soundome 12...
Страница 25: ...JULY2014 3 Edition...