CAUTION
The power socket must be set according to the following regulations
1.Make sure that a properly grounded (3 prong) outlet has been installed.
2.The length of the power cord is about 3.6ft(1.1m). The location of the power socket should be
as far away from the bathtub as possible to facilitate the installation and removal of this product.
3.It is recommended to use waterproof sockets, do not use extension cords to connect products.
●May cause fire or electrical shock
The toilet dimensions must be within those shown below.
Do not install this appliance on a toilet that does not meet those dimensional requirements.
A.Distance between mounting hole and water tank > 1.5"(40mm)
B.Mounting hole spacing = 5"-7.25"(130-185mm)
C.Distance between mounting hole and ceramic inner ring < 2.38"(60mm)
D.The best distance between the water tank and the outer end of the ceramic
=20"-20.5"(510-525mm)
E.The best size of ceramic inner ring =14.13-15"(360-380mm)
PRODUCT INSTALLATION
PARTS NAMES
Fader button
Filter
Adapters
Mounting plate
Spare parts
1.Installing spare parts
3.User manual
2.Water inlet spare parts
Mounting plate
Mounting bolts and nuts
2pcs
T-valve
Water supply hose
Adjust slide
2pcs
Bolt guides
2pcs
User Manual
USER MANUAL
Homtone
USER MANUAL
Homtone
